Overview of principles
The finely ground pulp is fed into the water tank from the feed inlet in the middle of the settlement area. The slurry gradation settlement area is under the inclined installation of the water tank. The spiral low speed rotation plays a role in stirring the pulp, making the fine particles suspended above and overflow to the overflow weir.
Coarse particles sink to the bottom of the tank and are transported by a screw to the discharge port for return sand discharge. The position of the overflow weir is higher than the bearing center at the lower end of the spiral shaft and lower than the upper edge of the spiral at the overflow end.
Range of use& Features
◎ Return sand end added a return sand automatic lifting device, ball mill to cancel the configuration of the scoop head.
◎ Each ton of ore can save electricity by 1-1.5 degrees;
◎ Avoid frequent overhaul of the ball head of the ball mill;
◎ Reduced the uneven impact of the ball mill on the large and small gears.
Suitable for coarse grain classification.
Range of use & Features
◎ Return sand end added a return sand automatic lifting device, ball mill to cancel the configuration of the scoop head.
◎ Each ton of ore can save electricity by 1-1.5 degrees;
◎ Avoid frequent overhaul of the ball head of the ball mill;
◎ Reduced the uneven impact of the ball mill on the large and small gears.
Suitable for coarse grain classification.
We are not only provider but also end user. Rich experience to provide the most reasonable and high-quality solutions from the perspective of customers when providing services to customers.
Copyright © 2021 Y&X Beijing Technology Co., Ltd. | All Rights Reserved
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist
