| YX

Latest products

Mining Industrial Banana Screen For Efficient Material Classification

High Uptime Spiral Screw Classifier , Spiral Sand Classifier For Ore Dressing

Hign Quality Pulp Mixing Tank With Agitator In Flotation Mine Process

Mining Vibrating Sieve Drum Screen All Kind of Size Meshes Customized

Product Information
Feedback

The electric furnace has a rectangular shape and is made of angle steel plate. The working chamber is made of silicon carbide or high-aluminum material. The heating element is wound in the furnace with high-temperature resistance wire. The light brick or silicon cotton felt is used as insulation material. Equipment to form a complete set of equipment.

The main technical parameters

Model Data		SX- 2.5-10	SX- 2.5-12	SX- 4—10	SX- 5—12	XL-1	SX- 8—10	SX- 10-12	SX- 12—10
rated power	KW	2.5		4	5	4	8	10	12
Rated voltage	V	220					380/220
Rated maximum temperature	°C	1000	1200	1000	1200	1000	1000	1200	1000
Heating element connection		In parallel					Y/A
Empty furnace heating time	miln	≤60	≤100	≤100	≤150	≤120	≤150	≤160	≤180
Empty furnace power loss	KW	≤1	≤1.6	≤1.7	≤1.8	≤1.7	≤2.4	≤3.0	≤4.5
Furnace size:
long	mm	200		300		325	400		500
width	mm	120		200		200	250		300
high	mm	80		120		125	160		200
Dimensions:
long	mm	600		700		650	850		1000
Width	mm	370		465		600	530		655
High	mm	450		550		490	625		680
With controller model		KSW-6-12					KSW-12-12

Installation

Electric furnace system complete equipment, whether the inspection of the open package is complete, whether the controller and the thermocouple are matched, the electric furnace and the controller can be installed on the appropriate ground or workbench according to the situation of the workshop or the laboratory, and at the level, according to the electric furnace And the specification or wiring of the controller is connected with various wires and tightened. The wires connecting the power supply should be selected according to the load standard of the electric furnace current. The thermocouple is inserted into the temperature measuring hole of the electric furnace 20-50 mm, and the thermocouple gap is asbestos. Rope or aluminosilicate padding to reduce heat loss.

Usage

According to the controller's instructions, adjust the electric furnace to the required temperature for use. The first time or the long time after use, the furnace must be dried to prevent the furnace and the door from shrinking and rupturing.

Drying time: 20℃-200℃ 8 hours

200℃-900℃ 10 hours

900℃-950℃ 2 hours

When drying at about 200℃, slightly open the furnace door and let go of the moisture in the furnace.

Matters needing attention

1. The ground wire must be installed.

2 Turn off the power when loading materials.

3Alkaline, acidic substances and hydrogen chloride will oxidize the heating elements at high temperatures, which will shorten the service life.

4The liquid is not allowed to overflow on the heating element to avoid burning the heating element.

5 Regularly check the fastening wiring connection screws.

6 It must work in the case where the relative temperature does not exceed 85% and there is no conductive dust and Egyptian explosive gas.

7Keep the inside of the furnace clean.

8Continuous work should be within 12 hours.

9Cracks in the furnace can continue to be used without affecting the overall structure.

v******a

The company has always been adhering to the production concept of 'safety first, quality first', and standardized production in strict accordance with national standards. The produced is fine in workmanship, high in quality, beautiful and practical.

w******d

Y&X Beijing Technology Co., Ltd. Through strict selection and supervision of raw material supply channels, the source is well controlled, and then is produced and processed relying on its own advanced equipment, mature technology and technology, and strict procedures and processes are carried out for each step Control, control the core of production, and finally conduct a detailed inspection of each finished product in accordance with the relevant international quality standard system to ensure that every product produced is a top-quality product with excellent quality .

d******u

Y&X Beijing Technology Co., Ltd. not only has a unique production process and advanced production equipment, but also carefully selects the raw materials of , which provides a strong guarantee for the quality of .

a******f

This product has the characteristics of simple operation, low material consumption, non-toxicity and more reasonable cost performance.

l******h

The manufactured by us with advanced design concepts not only strives for excellence in workmanship, scientific and reasonable design, but also has stable performance and durability, which can meet customers' needs for high-quality products.

n******n

For its high level of , it can efficiently prolong the lifespan of . With a double protective coating, its fabrics can prevent light transmission

Product Message

*Name

Phone

*E-mail

*Content